Saturday, January 2, 2010

Dish Towel Apron

Here are the steps on how to make a really quick and easy apron from a dish towel…

1. Iron the dish towel. Fold down the corners so that you have the top of your apron. Pin down the corners and hold it up to see if the size is right.

apron instructions 01

2. When you have it just the way you want it, press the corners down. Then sew them with a 1/4” seam allowance from the folded edge.

3. Cut off the excess material from the flaps about 1/4” from the seam. Use pinking shears if you have them.

apron instructions 024. Attach your straps (make sure they are the length you want before you sew them on) on the back of your apron right where the bottom of your corner was. Be sure to go over it a few times to make sure it is secure.

apron instructions 04apron instructions 035. Now attach your neck strap. Pin it on and make sure you can get it over your head and that you like the length before you sew it on. You can do it to the back or to the front of the apron. Again, be sure to go back and forth a few times to secure it well.

apron instructions 05   this one is fastened on the back

apron instructions 06

this one is fastened to the front and then accented with wooden buttons

6. Embellishments are next… If you want to, you can attach pockets, ribbon, ric-rack, buttons, whatever you would like. Or you can do nothing at all.

apron instructions 07one pocket with ribbon accent

apron instructions 08 

two pockets with ric-rack accents

7. Now you’re done! Enjoy your new apron and clean pants… :o)

apron instructions 09winter apron 02

1 comment:

The Graber's said...

I am going to try and make an apron today with your steps.